EasyManuals Logo

Yealink SIP-T40P User Manual

Yealink SIP-T40P
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
Customizing Your Phone
31
2. Press or , or the Switch soft key to select # or * from the Key As Send field, or
select Disabled to disable this feature.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
Key as send is configurable via web user interface at the path Features->General Information.
Phone Lock
You can lock your phone temporarily when you are not using it. This feature helps to protect
your phone from unauthorized use.
Phone lock consists of the following:
Menu Key: The Menu soft key is locked. You cannot access the menu of the phone
until unlocked.
Function Keys: The function keys are locked. You cannot use the MESSAGE, Redial,
Mute, OK, X, navigation keys and soft keys until unlocked.
All Keys: All keys are locked except the Volume key, digit keys, * key, # key,
HEADSET key and Speakerphone key. You are only allowed to dial
emergency numbers, reject incoming calls by pressing the X key or the
Reject soft key, answer incoming calls by lifting the handset, pressing
the Speakerphone key, the HEADSET key, the OK key, or the Answer
soft key, mute an active call by pressing the Mute key, and end the call
by hanging up the handset, pressing the Speakerphone key or the
EndCall soft key.
Note
To activate the phone lock via phone user interface:
1. Press Menu->Settings->Basic Settings->Phone Lock.
2. Enter the desired PIN (default PIN: 123) in the Unlock PIN field, and then press the OK soft
key.
The emergency number setting, if desired, must be set before lock activation. For more
information, refer to Emergency Number on page 74.

Table of Contents

Other manuals for Yealink SIP-T40P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T40P and is the answer not in the manual?

Yealink SIP-T40P Specifications

General IconGeneral
Wi-FiNo
Quality of Service (QoS) supportYes
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
Power consumption (typical)3.23 W
Battery voltage5 V
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports2
Display diagonal2.3 \
Display resolution132 x 64 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts3
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsG.711, G.722, G.726, G.729A, G.729B
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth256 mm
Package width620 mm
Package height233 mm
Package weight6400 g

Related product manuals