Yealink SIP-T40P User Manual

User Guide for the SIP-T40P IP Phone
38
The LCD screen displays the list(s) in the adjusted order.
6. Click Confirm to accept the change.
Note
To view the directory list(s) via phone user interface:
1. Press the Dir soft key when the phone is idle.
The LCD screen displays the enabled list(s) in the directory.
If there is only one list in the directory, press the Dir soft key to enter this list directly.
Note
Local Directory
The built-in phone directory can store the names and phone numbers of your contacts. You can
The list(s) to access for the Dir soft key is configurable via web user interface only.
If the remote phone book and LDAP are not configured in advance, you cannot see remote
phone book and LDAP lists on the phone user interface. For more information on remote phone
book, refer to Remote Phone Book on page 49. For more information on LDAP, contact your
system administrator.

Yealink SIP-T40P Specifications

General

Wi-Fi	No
Quality of Service (QoS) support	Yes
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 95 %
AC adapter input voltage	100 - 240 V
AC adapter output current	0.6 A
Power consumption (typical)	3.23 W
Battery voltage	5 V
RJ-11 ports quantity	1
Ethernet LAN (RJ-45) ports	2
Display diagonal	2.3 \
Display resolution	132 x 64 pixels
Lines quantity	- lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Voice codecs	G.711, G.722, G.726, G.729A, G.729B
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	189 mm
Width	212 mm
Height	175 mm
Package depth	256 mm
Package width	620 mm
Package height	233 mm
Package weight	6400 g