Advanced  Phone  Features 
161 
-  Press the line key when the phone is idle to enter the dialing screen. 
Enter the desired number using the keypad and then press          ,            , or the Send soft 
key. 
The phone will dial the entered number. 
To place multiple calls on the bridged line: 
You can have more than one call on the bridged line. To place a new call when there is an active 
call on phone A, do one of the following on the phone A: 
-  Press the Hold soft key. The original call is placed on hold. 
Press the NewCall soft key to enter the dialing screen. 
Enter the desired number using the keypad. 
Press          ,            , or the Send soft key. 
Phone A will dial the entered number. 
-  Press the line key. The original call is placed on hold. 
Enter the desired number using the keypad. 
Press          ,            , or the Send soft key. 
Phone A will dial the entered number. 
Answering Calls 
When the phone C dials the BLA number “14084588327”, an incoming call will arrive on the 
bridged line. The phone A and phone B ring simultaneously and the LED indicators of the line 
key on both phone A and phone B will flash green. You can answer the incoming call on either 
phone A or phone B but not both. 
Do one of the following on phone A or phone B: 
-  Press          ,            or the Answer soft key on phone A. 
Phone B stops ringing. The LED indicator of the line key on the phone A will illuminate solid 
green. At the meanwhile, the LED indicator of the line key on the phone B will illuminate 
solid red indicating that there is an active call on the phone A. 
-  Press          ,            or the Answer soft key on phone B. 
Phone A stops ringing. The LED indicator of the line key on the phone B will illuminate solid 
green. At the meanwhile, the LED indicator of the line key on the phone A will illuminate 
solid red indicating that there is an active call on the phone B. 
Placing a Call on Hold 
To place a call on hold: 
1.  Press the Hold soft key on phone A when party A and party C are talking. 
The line key LEDs on phone A slowly flash green and phone B slowly flash red when the 
bridged line call is placed on hold.