EasyManuals Logo

Yealink SIP-T40P User Manual

Yealink SIP-T40P
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #177 background imageLoading...
Page #177 background image
Advanced Phone Features
165
If the voice mail pop-up message box disappears, it won't pop up again unless the user receives
a new voice mail or the user re-registers the account that has unread voice mail(s).
Note
To leave a voice mail:
You can leave a voice mail for someone else when he/she is busy or inconvenient to answer the
call. Follow the voice prompt from the system server to leave a voice mail, and then hang up.
To configure voice mail access codes via phone user interface:
1. Press Menu->Message->Voice Mail->Set Voice Mail Code.
2. Press the navigation keys to highlight the account which you want to set.
3. Press the 123 soft key to select the proper input mode and then enter the voice mail
access code (e.g., *97).
4. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
To listen to voice mails:
1. When the LCD screen prompts that the phone receives a new voice mail and the power
indicator LED slowly flashes red, you can press or the Connect soft key to dial out
the voice mail access code.
2. Follow the voice prompt to listen to your voice mails.
Note
To view the voice mail via phone user interface:
1. Press Menu->Message->Voice Mail->View Voice Mail.
You can configure the phone not to display the pop-up prompt, contact your system
administrator for more information.
Before listening to voice mails, make sure the voice mail access code has been configured.
When all new voice mails are retrieved, the power indicator LED will go out.
Voice mail access codes must be predefined on the system server. Contact your system
administrator for the more information.

Table of Contents

Other manuals for Yealink SIP-T40P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T40P and is the answer not in the manual?

Yealink SIP-T40P Specifications

General IconGeneral
Wi-FiNo
Quality of Service (QoS) supportYes
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
Power consumption (typical)3.23 W
Battery voltage5 V
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports2
Display diagonal2.3 \
Display resolution132 x 64 pixels
Lines quantity- lines
Phonebook capacity1000 entries
Number of VoIP accounts3
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsG.711, G.722, G.726, G.729A, G.729B
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth256 mm
Package width620 mm
Package height233 mm
Package weight6400 g

Related product manuals