Available Features with Optional Accessories
203
6. If the network is secure, enter its password.
7. Press OK.
Note
Connecting to the Wireless Network Using Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) provides simplified mechanisms to configure secure wireless
networks which can automatically configure a wireless network with a network name (SSID) and
strong WPA data encryption and authentication.
Two methods supported by Yealink IP phones in the Wi-Fi protected setup:
Push Button Configuration (PBC): The user simply has to press WPS key on both the IP
phone and gateway/router to connect.
Personal Identification Number (PIN): The user has to enter a PIN generated randomly
by the IP phone on the gateway/router to connect.
Push Button Configuration (PBC)
Procedure:
1. Navigate to Menu->Basic->Wi-Fi.
2. Activate the Wi-Fi mode (refer to Activating the Wi-Fi Mode).
3. Press the WPS, and then select WPS.
The LCD screen prompts “WPS has been activated, connect in 120s!”.
4. Long press the WPS key on your gateway/router.
Once WPS setup has completed successfully, the LCD screen will prompt “Connect
Success.”.
Personal Identification Number (PIN)
Procedure:
1. Navigate to Menu->Basic->Wi-Fi.
For more information on the password of the wireless network, contact your system
administrator.
To Next Page
Loading...
Need help?
General
