Yealink T54W

MetroNet -Yealink Desk Phones T54W & T57W User Guide
Version 1.0
10.25.2021
32
phone.
3.7 Rejecting Calls with DND on All Lines
If there are multiple lines on the phone, you can enable DND for all lines. After activating it, the
phone will reject all incoming calls automatically.
Note: If both DND and busy forward are activated on the phone, calls will be forwarded to the
configured destination number.
Before You Begin: Check with your system administrator if the DND on code or off code is
required. If required, obtain it from your system administrator.
Procedure
1. Navigate to Menu > Features > DND.
2. Turn on DND.
3. (Optional.) Enter the DND on code or off code respectively in the On Code or Off Code field.
4. Select Save.
• The DND icon appears in the status bar. For T57W/T54W, the phone also prompts you that
DND is enabled.
Figure 12. Enable DND for All Lines
Tip: To activate or deactivate DND quickly, press the DND soft key when the phone is idle.
3.7.1.1 Rejecting Calls with DND on a Specific Line
By default, the DND feature applies to all lines on your phone. Your system administrator can
change the DND mode to Custom so that you can enable DND for specific lines.
Before You Begin: The DND mode is set to Custom. Check with your system administrator if the
DND on code or off code is required. If required, get it from your system administrator.
Procedure
1. Navigate to Menu > Features > DND.
2. Select the desired line.