Yealink T54W

MetroNet -Yealink Desk Phones T54W & T57W User Guide
Version 1.0
10.25.2021
46
Figure 19. Recording a Call
3.16.2 Pausing/Resuming a Recording
When you do not want the current sensitive information to be recorded, you can pause the
recording. After pausing, you can resume it at any time and the recording continues and will be
saved in the same file.
Procedure
1. Select Pause REC to pause a recording.
• The pause recording icon appears on the phone screen and the duration stops counting.
2. Select Resume REC to resume a recording.
Note: If you hold the call during the recording, none of the parties will be recorded until you
resume the call.
3.16.3 Stopping a Recording
You can stop recording a call before the call ends. The recording also stops when the active call
ends. The recording will be saved as a “*.wav” file the USB flash drive automatically.
Procedure
1. Do one of the following:
• Select Stop REC.
The recording icon and recording duration disappears. The screen prompts a message
that the call is recorded successfully.
• Select End Call.
The recording icon and recording duration disappears, and the phone returns to the idle
screen. The screen prompts a message that the call is recorded successfully.
3.16.4 Managing the Recordings
After stopping recording, you can manage the recordings on your phone. Make sure the USB flash