Yealink T54W

MetroNet -Yealink Desk Phones T54W & T57W User Guide
Version 1.0
10.25.2021
57
4.3.1.1 Retrieving a Parked Call in the Transfer Mode
You can retrieve a parked call in the transfer mode from any phone in the same network.
Before You Begin: Your system administrator has set call park in the Transfer mode. There is a
call parked on the shared parking lot.
Procedure
1. Select Retrieve (You may need to select the More( ) > Retrieve) on the dialing screen.
The phone will retrieve the parked call from the shared parking lot.
4.3.2 Parking or Retrieving a Call with a Park or Retrieve Key
You can easily use a Park key to park a call to a specific park orbit and quickly retrieve this parked
call using a retrieve key.
4.3.2.1 State Indicator of the Park/Retrieve Key
On the T57W/T54W phones, you can get the call park/retrieve status by viewing the icon indicator
of the Park/Retrieve keys.
Table 1. Park/Retrieve Key Indicator
4.3.2.2 Parking a Call Using a Park Key
You can set a line key as a Park key and specify an extension or a shared parking orbit you want
to park a call to for this key. By using the Park key, you can park a call quickly.
Before You Begin: Check with your system administrator if the FAC or Transfer mode is set on
your phone, and if
Account ID is necessary for this key.
Procedure
1. Navigate to Menu > Features > Dsskey.
2. Select the desired line key.
3. Select Key Event from the Type field.
4. Select Call Park from the Key Type field.
5. (Optional.) Select the desired line from the Account ID field.
6. Do one of the following:
• (Optional.) Enter the string that will appear on the phone screen in the Label field.