Administrator‘s Guide for Yealink Video Conferencing Systems
92
2. Select desired value from the pull-down list of Automatic Sleep Time.
3. Click Confirm to accept the change.
To configure the automaticsleep time via the remote control:
1. Select Menu->Basic.
2. Select desired value from the pull-down list of Automatic Sleep Time.
3. Press the Save soft key to accept the change.
When the system is idle, the display device displays shortcut keys and the status bar.
The status bar displays time and date, site name, IP address, SIP and H.323 account
(when SIP and H.323 account are registered). You can hide the system IP address.
The parameter to hide IP address is described below: