Administrator‘s Guide for Yealink Video Conferencing Systems
102
3. Select the desired value from the pull-down list of BFCP.
4. Click Confirm to accept the change.
Content sharing allows users to share content with other conference participants during
a call. When a PC is connected to the PC port on the VC400/VC120 codec, the display
device can display both the video and the shared content. The content sharing feature
is very useful in the conference scenario in which content sharing is needed (e.g., a slide
or a flash).
During a conference call, the far site may not support receiving shared content. In this
case, you can enable mix sending feature on the system. Mix sending feature allows
the sender to compound multiple video streams (local image+shared content) to one
video stream, and then send it to the far site.
The mix sending parameter on the system is described below.
To Next Page
Loading...
Need help?
General
