Yealink VC Series - Page 123

Configuring System Settings
113
Parameter
Description
Configuration Method
For more information about how
to customize the tone, refer to the
parameter ―Ring Back‖.
Default: Blank
Note: It only works if the
parameter ―Select Country‖ is set
to Custom.
Auto Answer
Customizes the auto answer tone
for the system.
For more information about how
to customize the tone, refer to the
parameter ―Ring Back‖.
Default: Blank
Note: It only works if the
parameter ―Select Country‖ is set
to Custom.
Web User Interface
To configure tones via the web user interface:
1. Click on Setting->Tones.
2. Select the desired value from the pull-down list of Select Country.
If you select Custom, you can customize the tone for indicating each condition of
the system.
3. Click Confirm to accept the change.