Yealink VC Series Administrator's Guide

System Management
121
local directory. LDAP entries displayed on the display devicescreen are read only. They
cannot be added to, edited or deleted by users. When an LDAP server is configured
properly, the system can look up entries from the LDAP server in a wide variety of ways.
The LDAP server indexes all the data in its entries, and "filters" may be used to select the
desired entry or group, and retrieve the desired information.
Configurations on the system limit the amount of displayed entries when querying from
the LDAP server, and decide how the attributes are displayed and sorted.
Performing a LDAP search on the system:
 Enter search content in the dialing screen. (Ensure that the LADP is in the enabled
search source lists)
 In the Directory screen, select Company to enter the LDAP search screen, and then
enter the content which you want to search.
The system will send the search request to the LDAP server, the LDAP server then
performs a search based on the entered content and configured filter condition, and
returns results to the system.
LDAP Attributes
The following table lists the most common attributes used to configure the LDAP lookup
on the system:
Abbreviation
Name
Description
gn
givenName
First name
cn
commonName
LDAP attribute is made up from
given name joined to surname.
sn
surname
Last name or family name
dn
distinguishedName
Unique identifier for each entry
dc
dc
Domain component
-
company
Company or organization name
-
telephoneNumber
Office phone number
mobile
mobilephoneNumber
Mobile or cellular phone number
ipPhone
IPphoneNumber
Home phone number
LADP parameters are described below:
Parameter
Description
Configuration Method
LDAP Enable
Enables or disables the LDAP
feature on the system.
Default: Disabled
Web User Interface
LDAP Name Filter
Configures the name attribute for
Web User Interface

Yealink VC Series Specifications

General

Brand	Yealink
Model	VC Series
Category	Conference System
Language	English