Administrator‘s Guide for Yealink Video Conferencing Systems
126
The web user interface prompts‖Delete the callog?‖
5. Click Confirm to delete the callog.
You can also select Delete All from the from the pull-down list of Delete Callog to delete
all calllog.
When you enter a few characters in the dialing screen, the system will search for
matching contacts from the enabled search source lists, and display the result in the
dialing screen. The lists can be Local Directory, History and LDAP.
To match the desired list, you need to enable the search source list first. If you want to
match the LADP list, make sure LDAP is already configured. For more information about
how to configure LDAP, refer to LDAP on page 120.
To configure search source list in dialing via the web user interface:
1. Click on Directory->Setting.
2. In the Search Source List In Dialing block, select the desired list from the Disabled
column and click .
The selected list appears in the Enabled column.
3. Repeat step 2 to add more lists to the Enabled column.
4. (Optional.) To remove a list from the Enabled column, select the desired list and
then click .
To Next Page
Loading...
