System Management
127
5. To adjust the display order of the enabled list, select the desired list, and click
or .
6. Click Confirm to accept the change.
The VC400 / VC120 has two display ports. When connecting only one display device to
the VC400/VC120 codec, Display1 port is the only available port. To make it easier for
users to view video images, users can connect two display devices to Display1 and
Display2. When two display devices are connected to the VC400/VC120 codec, the
status bar on the main display device displays icon. When the system is idle, the
second display device displays a local video image by default. Menu and status bar
are not displayed.
If a PC is connected to the PC port on the VC400/VC120 codec, the second display
device displays the presentation of the PC by default. During a video call, the second
display device displays a local video image by default. During a video call when the
local system is sharing a presentation, the second display device also displays the
presentation by default.
You can specity the display content on the second display device via the remote control.
To specify the displayed content on the second display device via the remote control:
1. Press the More soft key during an active call.
2. Select Focus (Display2), and then press .
3. Press or to select the desired content, and then press .
The second display device displays the selected content. The icon is
displayed on the focus content.
4. If the second display device displays the presentation initially, after reassigning the
display content on the second display device, the presentation will automatically
be displayed on the main display device.
To Next Page
Loading...
Need help?
General
