Yealink VC Series - Page 141

Configuring Security Features
131
Parameter
Description
Configuration Method
Old Password
Enters the old administrator
password.
Note: The default administrator
password is ―0000‖.
Remote Control
Web User Interface
New Password
Configures a new administrator
password.
Note: You can leave the
password blank.
Remote Control
Web User Interface
Confirm Password
Enters the new configured
administrator password.
Note: The entered password
must be the same as the one
configured by the parameter
―New Password‖.
Remote Control
Web User Interface
To configure administrator password via the web user interface:
1. Click on Security->Security.
2. Select Administrator from the pull-down list of User Type.
3. Enter the old administrator password in the Old Password field.
4. Enter a new password in the New Password field.
5. Enter the new password or leave it blank in the User Password field.
6. Click Confirm to accept the change.
To configure administrator password via the remote control:
1. Select Menu->Advanced (default password: 0000)->Password Reset.
2. Enter the old password in the Current Password field.
3. Configure a new password in the New Password and Confirm Password fields.
4. Press the Save soft key to accept the change.