Yealink VC Series - Page 142

Administrator‘s Guide for Yealink Video Conferencing Systems
132
Web server type determines the access protocol of the system‘s web user interface. The
system supports both HTTP and HTTPS protocols for accessing the web user interface.
HTTP is an application protocol that runs on top of the TCP/IP suite of protocols. HTTPS is
a web protocol that encrypts and decrypts user page requests as well as the pages
returned by the web server. Both the HTTP and HTTPS port numbers are configurable.
Web server type parameters on the system are described below:
Parameter
Description
Configuration Method
HTTP
Enables or disables the user to
access the web user interface of
the system using the HTTP
protocol.
Default: Enabled
Note: If you change this
parameter, the system will reboot
to implement the changes.
Remote Control
Web User Interface
HTTP Port
Specifies the HTTP port for the
user to access the web user
interface of the system.
Valid Values: 1-65535
Default: 80
Note: Ensure that the configured
port is not used. If you change
this parameter, the system will
reboot to implement the
changes.
Web User Interface
HTTPS
Enables or disables the user to
access the web user interface of
the system using the HTTPS
protocol.
Default: Enabled
Note: If you change this
parameter, the system will reboot
to implement the changes.
Remote Control
Web User Interface
HTTPS Port
Specifies the HTTPS port for the
user to access the web user
interface of the system.
Valid Values: 1-65535
Web User Interface