Yealink VC Series Administrator's Guide

Administrator‘s Guide for Yealink Video Conferencing Systems
148
We may need you to provide the system configurations to the engineer to help analyze
problems. You can import configurations to your system to configure your system quickly.
The file format of configuration file must be *.bin.
To export the system configurations via the web user interface:
1. Click on Setting->Configuration.
2. Check or uncheck the Export Passwords checkbox according to actual demand.
3. Click Export.
If you check the Export Passwords checkbox, the web user interface is shown below:
4. Click Confirm to export the configurations.
To import the phone configurations via the web user interface:
1. Click on Setting->Configuration.
2. Click Browse to locate a configuration file from your local system.
3. Click Import to import the configuration file.
Reset the system to factory configurations after you have tried all appropriate
troubleshooting suggestions but still have not solved your problems. You need to note
that all customized settings will be overwritten after reset, such as the registered
account, contacts, and call history information. You can export the configuration first, so
you can re-import the configuration to recovery the system after the reset.
You can reset the system via the reset key on the VC400/VC120 codec, remote control or
web user interface.
Note
Reset of the system may take a few minutes. Do not power off until the phone starts up
successfully.

Yealink VC Series Specifications

General

Brand	Yealink
Model	VC Series
Category	Conference System
Language	English