Yealink VC Series - Page 164

Administrator‘s Guide for Yealink Video Conferencing Systems
154
Parameter
Description
Configuration Method
Default: Local
Server Name
Specify the server address where
the log will be exported.
Note: It only works if the
parameter ―Export System Log‖
is set to Server.
Web User Interface
System Log Level
Specify the system log level.
Note: The supported level is 0-9.
Higher value indicates more
detailed content.
Default: 9
Web User Interface
To configure the system log level via the web user interface:
1. Click on Setting->Configuration.
2. Select the desired level from the pull-down list of System Log Level.
3. Click Confirm to accept the change.
To export a log file to the local system via the web user interface:
1. Click on Setting->Configuration.
2. Mark the Local radio box In the Export System Log field.