Yealink VC Series Administrator's Guide

Configuring Network
31
Parameter
DHCP Option
Description
Domain Server
15
Specifies the domain name that client should
use when resolving hostnames via DNS.
Broadcast
Address
28
Specifies the broadcast address in use on the
client's subnet.
Network Time
Protocol
Servers
42
Specifies a list of the NTP servers available to
the client by IP address.
Vendor-Specific
Information
43
Identifies the vendor-specific information.
Vendor Class
Identifier
60
Identifies the vendor type.
TFTP Server
Name
66
Identifies a TFTP server when the 'name' field
in the DHCP header has been used for DHCP
options.
Bootfile Name
67
Identifies a bootfile when the 'file' field in the
DHCP header has been used for DHCP
options.
For more information about DHCP options, refer to
http://www.ietf.org/rfc/rfc2131.txt?number=2131 or
http://www.ietf.org/rfc/rfc2132.txt?number=2132.
To make the system gather network settings via DHCP options, you need to contact your
network administrator to configure the DHCP server properly.
DHCP feature parameters on the system are described below:
Parameter
Description
Configuration Method
DHCP
Enables or disables the system to
obtain network settings from the
DHCP server.
Default: Enabled
Note: If you change this
parameter, the system will reboot
to implement the changes.
Remote Control
Web User Interface
Host Name
Configures the host name of the
system.
Default: Blank
Note: When the system
broadcasts DHCP DISCOVER
Web User Interface

Yealink VC Series Specifications

General

Brand	Yealink
Model	VC Series
Category	Conference System
Language	English