Administrator‘s Guide for Yealink Video Conferencing Systems
32
messages, it will report the
configured host name to the
DHCP server via DHCP option 12.
Host name is optional, so it is not
a mandatory configuration item.
For more information, contact
your network administrator.
If you change this parameter, the
system will reboot to implement
the changes.
To configure DHCP via the web user interface:
1. Click on Network->LAN Configuration.
2. In the IP Config block, mark the DHCP radio box.
3. Enter the host name of the system in the Host Name field.
4. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
5. Click Confirm to reboot the system immediately.
To configure DHCP via the remote control:
1. Select Menu->Advanced (default password: 0000)->LAN Configuration.
2. Check the DHCP checkbox.
To Next Page
Loading...
