Configuring Network
37
2. Select the desired value from the pull-down list of Network Speed.
3. Click Confirm to accept the change.
A dialog box pops up to prompt that settings will take effect after a reboot.
4. Click Confirm to reboot the system immediately.
LLDP (Linker Layer Discovery Protocol) is a vendor-neutral Link Layer protocol, which
allows the system to receive and/or transmit device-related information from/to directly
connected devices on the network that are also using the protocol, and store the
information about other devices. LLDP transmits information as packets called LLDP
Data Units (LLDPDUs). An LLDPDU consists of a set of Type-Length-Value (TLV) elements,
each of which contains a particular type of information about the device or port
transmitting it.
LLDP-MED (Media Endpoint Discovery)
LLDP-MED is published by the Telecommunications Industry Association (TIA). It is an
To Next Page
Loading...
Need help?
General
