Yealink VC Series Administrator's Guide

Administrator‘s Guide for Yealink Video Conferencing Systems
40
Parameter
Description
Configuration Method
to implement the changes.
Packet
Interval(1-3600s)
Configures the interval (in
seconds) for the system to send
LLDP requests.
Default: 60
Note: If you change this
parameter, the system will reboot
to implement the changes.
Remote Control
Web User Interface
To configure LLDP via the web user interface:
1. Click on Network->Advanced.
2. In the LLDP block, select the desired value from the pull-down list of Active.
3. Enter the desired time interval in the Packet Interval (1-3600s) field.
4. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
5. Click Confirm to reboot the system immediately.
To configure LLDP via the remote control:
1. Select Menu->Advanced (default default password: 0000) ->Advanced Network.
2. In the LLDP block, check the Active checkbox.
3. Enter the desired value in the Packet Interval (1-3600s) field.
4. Press the Save soft key to accept the change.
The display device prompts ―Reboot now?‖.
5. Select OK to reboot the system immediately.

Yealink VC Series Specifications

General

Brand	Yealink
Model	VC Series
Category	Conference System
Language	English