Configuring Network
47
1) Enter the user name for authentication in the Identity field.
2) Leave the MD5 Password field blank.
3) In the CA Certificates field, click Browse to locate the desired CA
certificate (*.pem,*.crt, *.cer or *.der) from your local system.
4) In the Device Certificates field, click Browse to locate the desired client
certificate (*.pem or *.cer) from your local system.
5) Click Upload to upload the certificates.
c) If you select PEAP-MSCHAPv2:
1) Enter the user name for authentication in the Identity field.
2) Enter the password for authentication in the MD5 Password field.
3) In the CA Certificates field, click Browse to locate the desired certificate
(*.pem,*.crt, *.cer or *.der) from your local system.
To Next Page
Loading...
