Yealink VC Series Administrator's Guide

Administrator‘s Guide for Yealink Video Conferencing Systems
68
3. Press the Save soft key to accept the change.
After successful registration, the display device displays , and the LCD
screen of the VCP40 phone displays .
Yealink VC400/VC120 video conferencing systems support H.323 protocol. If your
network uses a gatekeeper, you can register an H.323 account for the system, and
specify its H.323 name and extension. This allows others to call the system by entering
the H.323 name or extension instead of the IP address.
SIP settings parameters on the system are described below:
Parameter
Description
Configuration Method
H.323 Active
Enables or disables the H.323
account.
Default: Enabled
Remote Control
Web User Interface
H.323 Name
Specifies the name that the
gatekeeper uses to identify the
system.
Default: blank
Remote Control
Web User Interface
H.323 Extension
Specifies the extension that the
gatekeeper uses to identify the
system.
Default: blank
Note: Users can place calls
using the extension.
Remote Control
Web User Interface
Gatekeeper ID
Configures the gatekeeper ID.
Note: This is set only when
required by the gatekeeper. For
example, for configurations
with multiple gatekeepers. The
gatekeeper ID must match the
gatekeeper ID configured for
the gatekeeper to which the
system is registering. Do not
configure this parameter if the
gatekeeper does not require it,
as this may result in failure to
register with the gatekeeper.
Remote Control
Web User Interface
Gatekeeper Mode
Configures the gatekeeper
Remote Control

Yealink VC Series Specifications

General

Brand	Yealink
Model	VC Series
Category	Conference System
Language	English