EasyManuals Logo

Yealink VC120 Administrator's Guide

Yealink VC120
319 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #162 background imageLoading...
Page #162 background image
Administrator’s Guide for Yealink Video Conferencing Systems
146
Video codecs parameters on the system are described below:
Parameter
Description
Configuration Method
Enable Codecs
Specifies the enabled video codecs
for the system to use.
Note: All support video codecs are
enabled on the system by default.
Web User Interface
Disable Codecs
Specifies the disabled video codecs
for the system not to use.
Web User Interface
To configure video codecs via web user interface:
1. Click on Account->Codec.
2. Select the desired video codec from the Disable Codecs or the Enable Codecs column.
3. Click or to disable or enable the selected video codec.
4. Select the desired video codec from the Enable Codecs column, and click or to
adjust the priority of the selected video codecs.
5. Click Confirm to accept the change.
Call Protocol
The system supports SIP and H.323 protocols for incoming and outgoing calls. H.323 is
commonly used to communicate to other video conferencing system. SIP is commonly used to

Table of Contents

Other manuals for Yealink VC120

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VC120 and is the answer not in the manual?

Yealink VC120 Specifications

General IconGeneral
BrandYealink
ModelVC120
CategoryConference System
LanguageEnglish

Related product manuals