Configuring System Settings
201
Configuring Camera Settings
To display high quality video image, you can configure camera settings as required, such as
white balance, exposure and sharpness.
Camera settings parameters are described below.
Configures the value of camera
exposure compensation.
Off
1
2
3
Exposure compensation is used to
compensate the camera effectively
when the camera is shooting in a
backlight environment. If the
environment light is dark, you can
increase the compensation value.
Default: Off
Remote Control
Web User Interface
Disables or configures the value of
camera flicker frequency.
50Hz
60Hz
Default: 50Hz
Note: Indoor lights powered by a
50Hz or 60Hz power source can
produce a flicker. You can adjust the
camera flicker frequency according
to the power source the light is
powered by.
Remote Control
Web User Interface
Configures the white balance mode
of the VCC18 camera.
Auto—Yealink recommends
this setting for most situations.
It calculates the best white
balance setting based on
lighting conditions in the
room.
Remote Control
Web User Interface
To Next Page
Loading...
