Getting Started
45
Yealink video conferencing system supports Yealink VC Cloud Management
Service/Yealink Meeting Server/StarLeaf/Zoom/Pexip/BlueJeans/Mind/Custom platform.
For more information, refer to Configuring Video Conference Platform on page 99.
13. Press (Complete soft key) to complete the setup wizard.
Enabling Communication with Other Systems
Depending on your environment, you may need to make the following additional adjustments
to the configuration of your video conferencing system.
If you choose to place your video conferencing systems in a private LAN, you
must use Network Address Translation (NAT) to communicate with outside
systems. This may include enabling static NAT on your system. For more
information, refer to Static NAT on page 81.
If your system communicates with other devices through a firewall, you must
configure your firewall to allow incoming and outgoing traffic to the system
through reserve ports. Users placing calls through a firewall to systems with
IP addresses may experience one-way audio or video if the firewall is not
properly configured to allow video and audio traffic. For more information,
refer to Configuring the System for Use with a Firewall or NAT on page 77.
If you are using Cloud server in your environment and want to place calls
using Cloud account, refer to Configuring Video Conference Platform on
page 99.
If you are using H.323 gatekeepers in your environment and want to place
calls using a name or extension with the H.323 protocol, refer to Configuring
H.323 Settings on page 130.
If you are using Session Initiation Protocol (SIP) servers in your environment
to place calls using the SIP protocol, refer to Configuring SIP Settings on
To Next Page
Loading...
