Administrator’s Guide for Yealink Video Conferencing Systems
148
Account Polling
When you dial account numbers of other system, account polling feature enables your system
to use different call types according to this priority: Cloud platform>H.323 account>SIP account.
If you cannot call other systems using all your registered accounts, then this call fails.
Account polling is disabled by default. When you register multiple accounts (2 or more) for your
system, you can enable account polling feature. You can configure account polling feature via
web user interface only.
Account polling parameter on the system is described below:
Enables or disables the account
polling on the system.
Disabled—the system can only
call other system’s account
using the call type with the
highest priority (Cloud
platform>H.323 account>SIP
account).
Enabled—the system will
attempt to call other system’s
account using different call
types according the priority
(Cloud platform>H.323
account>SIP account).
Default: Disabled
Remote Control
Web User Interface
To configure account polling via web user interface:
1. Click on Setting->Call Features.
To Next Page
Loading...
