Yealink VC120 - Page 189

Configuring System Settings
173
Parameter
Description
Configuration
Method
in Month
Note: It only works if the value
of the Daylight Saving Time is set
to Enabled.
End Hour of Day
Offset(minutes)
Configures the DST offset time
(in minutes).
Valid values: -300 to +300.
Note: It only works if the value
of the Daylight Saving Time is set
to Enabled.
Web User Interface
Time Type
Configures the DST time type.
 SNTP: obtain the time and
date from the NTP server
automatically.
 Manual Time: configure
the time and date manually.
Default: SNTP
Remote Control
Web User Interface
Time Format/ Time
Configures the time format.
 Hour12
 Hour24
Default: Hour 24
Remote Control
Web User Interface
Date Format/Date
Configures the date format.
 WWW MMM DD
 DD-MMM-YY
 YYYY-MM-DD
 DD/MM/YYYY
 MM/DD/YY
 DD MMM YYYY
 WWW DD MMM
Default: YYYY-MM-DD
Remote Control
Web User Interface
To configure the NTP server, time zone and DST via web user interface:
1. Click on Setting->Date &Time.
2. Select Disabled from the pull-down list of Manual Time.
3. Select the desired time zone from the pull-down list of Time Zone.