Configuring System Settings
207
VC120 Codec using the VC Dual-camera Box VCB20, you can store up to 64 preset camera
positions for camera 1 and 63 preset camera positions for camera 2.
The following example illustrates a scenario where multiple preset feature is used:
There are multiple speakers in a large meeting room. You can set multiple preset camera
positions for each speaker. When someone speaks, the camera can be adjusted to the
corresponding preset camera position that is associated with the current speaker.
Multiple preset parameters are described below.
Enables or disables the multiple preset
feature on the system.
Default: Off
Points local camera at a preset position
Replaces the stored camera preset position
with current camera preset position.
Deletes the selected preset position.
Clears all preset positions.
Remote Control
Web User Interface
To configure multiple preset via web user interface:
1. Click on Setting->Camera.
2. Select the On from the pull-down lists of Multiple Preset.
3. Click Confirm to accept the change.
To Next Page
Loading...
