Yealink VC120 - Page 229

Configuring System Settings
213
Camera control protocol parameters are described below:
Parameter
Description
Configuration Method
FECC(H.323)
Enables or disables the FECC (H.323) protocol
for far site to control near camera. You can
configure it for the StarLeaf Cloud platform or
H.323 call separately.
Default: Enabled
Web User Interface
FECC(SIP)
Enables or disables the FECC (SIP) protocol
for far site to control near camera. You can
configure it for the
Zoom/Pexip/BlueJeans/Mind/Custom
platform, SIP account or SIP IP call separately.
Default:
For Zoom/Pexip/BlueJeans/Mind/Custom
platform and SIP IP call, the default value is
Enabled.
For SIP account, the default value is Disabled.
Note: You cannot configure it for the
Yealink/StarLeaf Cloud platform.
Web User Interface
To configure FECC(H.323) camera control protocol for StarLeaf Cloud platform via web
user interface:
1. Click on Account->VC Platform.
2. Select StarLeaf from the pull-down list of Platform Type.