Getting Started
43
The default administrator password is “0000”. For security reasons, the administrator
should change the default administrator password as soon as possible.
Note
8. Press (Next soft key) to continue or press (Previous soft key) to return to
the previous screen.
The display device displays firewall port mapping information.
Do remember the new administrator password or keep a copy of the password in a safe place. If
you forget the password, you will need to reset the system to the factory settings, and then reset
the password or use the default password “0000”.
For more information, refer to Resetting to Factory on page 271.
To Next Page
Loading...
