TA400/800 User Manual
16/64
groups on TA FXS Gateway2400.
Hunt group will be chosen when configuring the FXS port "Follow Me". The hunt group
will work when a call reaches the FXS port associated user which is busy or no
answer.
Figure 4-3 Hunt Group
Figure 4-4 Set Hount Group on "FXS Port" Page
There are 3 strategies for hunt group on TA FXS Gateway.
Simultaneous
All the FXS users will ring at the same time.
Circular
In circular hunting, the calls are processed "round-robin". If a call is delivered to
FXS port1, the next call will go to 2, the next to 3. The succession throughout each
To Next Page
Loading...
