TA400/800 User Manual
35/64
Advanced Settings
This chapter explains SIP settings and Distinctive Ringtones.
Distinctive Ringtones
Tone Zone Settings
RADIUS Settings
Distinctive Ringtones
TA400/800 provides 10 configurable distinctive ringtones. Users could configure
different ringtones to match different incoming caller ID.
For example, if Inbound Caller Pattern is configured as ―100.‖, all the incoming calls
start with digits ―100‖ will ring using cadence ―2000,4000‖ as the following figure
shows.
Figure 8-1 Distinctive Ringtones
Tone Zone Settings
Advanced ring tones for all the FXS ports can be configured on this page. There are
pre-grogrammed tone zone settings for some countries and regions. Users can simply
find and select thier country to get tone zone settings for the gateway.
Figure 8-2 Tone Zone Settings
Users may also configure the tone zone according to the national standard by
selecting "User custom for Tone Zone". Please refer to the document below and
To Next Page
Loading...
Need help?
General
