TA400/800 User Manual
6/64
Getting Started
In this chapter, we guide you through the basic steps to start with a new TA400/800:
Accessing Web GUI
Web Configuration Panel
Making and Receiving Calls
Accessing Web GUI
The TA400/800 attempts to contact a DHCP server in your network to obtain valid
network settings (e.g., the IP address, subnet mask, default gateway address and
DNS address) by default.
Please enable DHCP Server in your network to obtain the TA400/800 IP address.
How to check TA400/800 IP address:
1. Pick up the analog phone, then access the voice menu prompt by dialing ―***‖.
2. Dial "1" to check the IP address.
3. Dial "2" for web access address.
After entering the IP address in the web browser, users will see a log-in screen.
Check the default settings below:
Username: admin
Password: password
Figure 2-1 TA400/800 Login page
To Next Page
Loading...
Need help?
General
