TA400/800 User Manual
21/64
Table 5-3 Description of Dial Pattern Template Settings
The ID for this template.
A name for this template.
Calls from the FXS port should match the dial pattern set on this
template, or the call cannot be established. Hover the pointer
over to read tips.
Allows the user to specify the number of digits that will be stripped
from the front of the phone number before the call is placed.
The digits will be appended to the phone number before the call is
placed.
Set default mode for sending DTMF of this trunk. Default setting:
rfc2833.
Define the codec for this sip trunk and its priority.
SIP Settings
It is wise to leave the default setting as provided on this page. However, for a few
fields, you need to change them to suit your situation.
1) General
Figure 5-4 SIP General Settings
To Next Page
Loading...
Need help?
General
