TA400/800 User Manual
36/64
configure the tone zone settings on TA FXS Gateway:
http://www.itu.int/ITU-T/inr/forms/files/tones-0203.pdf
Figure 8-3 Customize Tones
Table 8-1 Description of Tone Zone Settings
Choose the country to get pre-programmed tone zone settings or
choose "User custom for Tone Zone" to configure the settings
manually.
Configuration option for all FXS ports ring cadence for all
incoming calls.
Prompt tone of off-hook dial tone.
The tone sent to caller when ringing is on.
Used for busy line prompt.
Used for notification in call waiting.
Used to indicate that an invalid code has been dialed, or that all
circuits (trunks) are busy and/or the call is unroutable.
Used for the second stage dial tone.
RADIUS Settings
TA FXS Gatewaysupports RADIUS (Remote Authentication Dial In UserService)
protocol. RADIUS feature is mainly for billing purpose on TA FXS Gateway. There
areprimary and secondary RADIUS server configurations available. Once the primary
server is unreachale, the RADIUS requests will be sent to the secondary server.
To Next Page
Loading...
Need help?
General
