-20-
6.1.3 Conformity
CE marking:
EMC Directive：EN61326、EN61000-3-2、EN61000-3-3
Low Voltage Directive：EN61010-1
Measurement category (*1)
Pollution Degree 2 (*2)
*1 To measure circuit connected to low voltage units, applied on electrical
instruments which has power supply from fixed power switchboard。
*2 Degree of adhesion of any solid, liquid or gas which may lower surface resistance
or electric strength, applied to normal room atmosphere.
6.1.4 Global Environment Action
Lead free solder is used.
Lead free glass is used.
To Next Page
Loading...