YOKOGAWA CSU-X1 - Specifications of Filter Wheel

-55-
Item Specification
Accessory 1. AC100VAC cable
2. Bright Field１connection cable (only for CSU-X1CU-B1)
3. Bright Field2connection cable(only for CSU-X1CU-B1)
4. CSU connection cable
5. RS232C cable （cross）
6. Interlock key for control unit
7.1.4 Specifications of Filter Wheel
Item Specification
Installable filters * Size: φ25mm>
* Max. 6 filters
* It is necessary to fill open positions with supplied dummy discs for
weight balance
Exchange speed * 33msec to the adjacent position. It is necessary to wait for 33msec<
before moving to the next position
* 66msec to move two positions. It is necessary to wait for 33msec<
before moving to the next position
* 99msec to move three positions. It is necessary to wait for 33msec<
before moving to the next position.
* Control unit makes the filter wheel move toward shortest direction.
Accessories * 6 Aluminum disks (dummy filter) to balance weight
* Special tool to screw/unscrew filter fixing rings
* Connection cable
Power supply 24V DC 3.7A>
Supplied from the control unit