7-10
IM CW120-E
7.2.5 Copying and Clearing Backup Memory Contents ( )
Description
The CW120/121 have a memory for backing up the PC card. When the PC
card becomes full or is removed, data is saved to the backup memory. For
details, see Section 9.5, “Backup Memory.”
When no data resides in the backup memory, namely, when the
mark
is not displayed on the measurement screen, this setting item cannot be
called.
Select
to copy the data in the backup memory to the PC card.
Select
to delete the data from the backup memory.
Procedure
(1) Using the keys in the setting item selection screen, make the
mark to appear on the screen. Then, press the key.
appears and flashes.
DISP
ENTER
MEAS/SET
ESC
MEAS/SET key
UP/DOWN/LEFT/RIGHT keys
ENTER key
ESC key
Copy Screen Deletion Screen
(2) Using the keys, select if you want to copy the data in
the backup memory to the PC card or
if you want to delete the data
from the backup memory.
(3) Press the
key. The selected action takes place and the setting item
selection screen returns.
To cancel copying or deleting data, press the key. The setting item
selection screen also returns.
7.2 Setting Each Item
To Next Page
Loading...
