ii IM 701610-61E
How to Use this Manual
Structure of the Manual
This user’s manual consists of 3 chapters, and an Index as described below.
Chapter Title Content
1I
2
C-Bus Signal Analysis Function Explains I
2
C-bus signal analysis function.
2 SPI-Bus Signal Analysis Function Explains SPI bus signal analysis function.
3 Specifications Lists the I
2
C-bus signal analysis function and SPI
bus signal analysis function specifications.
Index Index of contents.
Conventions Used in this Manual
Units
k ....... Denotes 1000. Example: 100 kS/s
K ...... Denotes 1024.
Example: 720 KB (storage capacity of a floppy disk)
Bolded Items
Characters written in bold mainly refer to characters or setting values that are displayed
on the screen or panel.
Symbols
The following symbols are used in to this manual.
Affixed to the instrument. Indicates danger to personnel or
instrument and the operator must refer to the user’s manual.
The symbol is used in the user’s manual to indicate the
reference.
WARNING
Calls attention to actions or conditions that could cause
serious or fatal injury to the user, and precautions that can
be taken to prevent such occurrences.
CAUTION
Calls attentions to actions or conditions that could cause
light injury to the user or damage to the instrument or user’s
data, and precautions that can be taken to prevent such
occurrences.
Note
Provides information that is important for proper operation of
the instrument.
Terms Used for Descriptions of Operations
The following terms are used in chapters 1 and 2 to distinguish certain features in
descriptions.
Relevant Keys
Indicates the relevant panel keys which are necessary to
carry out the operation.
Procedure
Carry out steps in the order shown. The operating
procedures are given with the assumption that you are not
familiar with the operation. Thus, it may not be necessary to
carry out all the steps when changing settings.
Explanation
Describes settings and restrictions relating to the operation.
To Next Page
Loading...
Need help?
General
