YOKOGAWA DL1640

1-33
IM 701610-61E
1
I
2
C-Bus Analysis Function
:TRIGger:I2C:PATTern:CHANnel<x>
Function Sets the channel condition of the I
2
C trigger
pattern condition or queries the current setting.
Syntax :TRIGger:I2C:PATTern:CHANnel {HIGH|
LOW|DONTcare}
:TRIGger:I2C:PATTern:CHANnel?
<x>=3, 4
Example :TRIGGER:I2C:PATTERN:CHANNEL3 HIGH
:TRIGGER:I2C:PATTERN:CHANNEL3? ->
1.7 Communication Commands
:TRIGGER:I2C:PATTERN:CHANNEL3 HIGH
:TRIGger:I2C:PATTern:CONDition
Function Sets the trigger condition of the I
2
C trigger pattern
condition or queries the current setting.
Syntax :TRIGger:I2C:PATTern:CONDition
{ENTer|EXIT|TRUE|FALSe}
:TRIGger:I2C:PATTern:CONDition?
Example :TRIGGER:I2C:PATTERN:CONDITION ENTER
:TRIGGER:I2C:PATTERN:CONDITION? ->
:TRIGGER:I2C:PATTERN:CONDITION ENTER
:TRIGger:I2C:TYPE
Function Sets the I
2
C trigger type or queries the current
setting.
Syntax :TRIGger:I2C:TYPE {STARt|NACK|
ADDRess}
:TRIGger:I2C:TYPE?
Example :TRIGGER:I2C:TYPE START
:TRIGGER:I2C:TYPE? -> :TRIGGER:I2C:
TYPE START
:TRIGger:TYPE
Function Sets the trigger type or queries the current
setting.
Syntax :TRIGger:TYPE {ABN|ADB|PATTern|
WIDTh|OR|TV|SIMPle|I2CBus}
:TRIGger:TYPE?
Example :TRIGGER:TYPE I2CBUS
:TRIGGER:TYPE? -> :TRIGGER:
TYPE I2CBUS