4-11
IM DL350E-17EN
Commands
4
4.1 List of Commands
Command Function page
:COMMunicate:VERBose
Sets or queries whether the response to a query is returned fully spelled out
or in its abbreviated form.
4-84
:COMMunicate:WAIT
Waits for a specified extended event to occur. 4-84
:COMMunicate:WAIT?
Creates the response that is returned when a specified extended event
occurs.
4-85
CURSor Group
:CURSor?
Queries all cursor measurement settings. 4-86
:CURSor:FFT?
Queries all FFT cursor settings. 4-86
:CURSor:FFT:MARKer:FORM
Sets or queries the form of an FFT cursor (marker cursor). 4-86
:CURSor:FFT:MARKer:M<x>?
Queries all settings of an FFT cursor (marker cursor). 4-86
:CURSor:FFT:MARKer:M<x>:DF<y>?
QueriesallΔFdisplaysettings.ΔFisbetweentheFFTcursors(marker
cursors).
4-86
:CURSor:FFT:MARKer:M<x>:DF<y>:S
TATe
SetsorquerieswhethertheΔFvaluebetweentheFFTcursors(marker
cursors) is displayed.
4-86
:CURSor:FFT:MARKer:M<x>:DF<y>:V
ALue?
QueriestheΔFvaluebetweentheFFTcursors(markercursors). 4-86
:CURSor:FFT:MARKer:M<x>:DY<y>?
QueriesallΔYdisplaysettings.ΔFisbetweentheFFTcursors(marker
cursors).
4-86
:CURSor:FFT:MARKer:M<x>:DY<y>:S
TATe
SetsorquerieswhethertheΔYvaluebetweentheFFTcursors(marker
cursors) is displayed.
4-86
:CURSor:FFT:MARKer:M<x>:DY<y>:V
ALue?
QueriestheΔYvaluebetweentheFFTcursors(markercursors). 4-86
:CURSor:FFT:MARKer:M<x>:F?
Queries all frequency-axis settings of an FFT cursor (marker cursor). 4-87
:CURSor:FFT:MARKer:M<x>:F:STATe
Sets or queries whether the frequency-axis value of an FFT cursor (marker
cursor) is displayed.
4-87
:CURSor:FFT:MARKer:M<x>:F:VAL
ue?
Queries the frequency-axis value of an FFT cursor (marker cursor). 4-87
:CURSor:FFT:MARKer:M<x>:POSiti
on
Sets or queries the position of an FFT cursor (marker cursor). 4-87
:CURSor:FFT:MARKer:M<x>:TRACe
Sets or queries the source waveform that you want to measure using the
FFT cursor (marker cursor).
4-87
:CURSor:FFT:MARKer:M<x>:Y?
Queries all Y-axis settings of an FFT cursor (marker cursor). 4-87
:CURSor:FFT:MARKer:M<x>:Y:STATe
Sets or queries whether the Y-axis value of an FFT cursor (marker cursor) is
displayed.
4-87
:CURSor:FFT:MARKer:M<x>:Y:VAL
ue?
Queries the Y-axis value of an FFT cursor (marker cursor). 4-87
:CURSor:FFT:PEAK<x>?
Queries all settings of an FFT cursor (peak cursor). 4-87
:CURSor:FFT:PEAK<x>:F?
Queries all frequency-axis settings of an FFT cursor (peak cursor). 4-87
:CURSor:FFT:PEAK<x>:F:STATe
Sets or queries whether the frequency-axis value of an FFT cursor (peak
cursor) is displayed.
4-87
:CURSor:FFT:PEAK<x>:F:VALue?
Queries the frequency-axis value of an FFT cursor (peak cursor). 4-88
:CURSor:FFT:PEAK<x>:RANGe
Sets or queries the FFT peak cursor measurement range. 4-88
:CURSor:FFT:PEAK<x>:Y?
Queries all Y-axis settings of an FFT cursor (peak cursor). 4-88
:CURSor:FFT:PEAK<x>:Y:STATe
Sets or queries whether the Y-axis value of an FFT cursor (peak cursor) is
displayed.
4-88
:CURSor:FFT:PEAK<x>:Y:VALue?
Queries the Y-axis value of an FFT cursor (peak cursor). 4-88
:CURSor:FFT:TYPE
Sets or queries the FFT cursor type. 4-88
:CURSor[:TY]?
Queries all cursor settings for the T-Y waveform. 4-88
:CURSor[:TY]:DEGRee?
Queries all angle cursor settings for the T-Y waveform. 4-88
:CURSor[:TY]:DEGRee:D<x>?
Queries all angle (D<x>) settings for the angle cursors on the T-Y waveform. 4-88
:CURSor[:TY]:DEGRee:D<x>:STATe
Sets or queries whether the angle (D<x>) between the angle cursors on the
T-Y waveform is displayed.
4-88
:CURSor[:TY]:DEGRee:D<x>:VALue?
Queries the angle (D<x>) between the angle cursors on the T-Y waveform. 4-88
:CURSor[:TY]:DEGRee:DD?
Queriesallangledifference(Δdvalue)settings.Theangledifferenceis
between the angle cursors on the T-Y waveform.
4-88
:CURSor[:TY]:DEGRee:DD:STATe
Setsorquerieswhethertheangledifference(Δdvalue)betweentheangle
cursors on the T-Y waveform is displayed.
4-88
:CURSor[:TY]:DEGRee:DD:VALue?
Queriestheangledifference(Δdvalue)betweentheanglecursorsonthe
T-Y waveform.
4-89
:CURSor[:TY]:DEGRee:DY?
QueriesallsettingsrelatedtotheΔYvaluebetweentheanglecursorsonthe
T-Y waveform.
4-89