v
IM IS8000-62EN
Notes on Usage
Notes on Using This Option
• This option can be used on two PCs per license. It can be used on two PCs simultaneously.
• To allow communication between a DL950 (hereafter referred to as the measuring instrument)
and a PC through its USB interface, you need to install a dedicated USB driver in the PC. For
details, see the Installation Manual, IM IS8000-04EN.
You can download the USB driver from the following web page:
https://tmi.yokogawa.com/jp/library/
• This option can control a single ECU and a measuring instrument.
• It is not possible to connect to the same measuring instrument from multiple PCs at the same
time.
• When you connect a measuring instrument to a PC and use this option to control the instrument,
you cannot use multiple types of communication interface at the same time.
• Do not perform panel operations on the measuring instrument while data is being recorded.
• The option may not be able to continue if the PC enters standby or hibernation mode. Disable
standby and hibernation modes when you use the software.
• If a connection error occurs, turn off the measuring instrument and then turn it back on.
Feature Restrictions
For the functional restrictions of each license, see the Installation Manual, IM IS8000-04EN.
To Next Page
Loading...
