YOKOGAWA PH202G (S) User Manual

IM 12B6C3-E-E
Calibration 6-7
pH
NO
YES
MAN.CAL
NO
YES
pH
MAN.CAL
YES
ENT
pH
MAN.CAL
pH
NO
YES
MAN.CAL
YES
pH
NO
YES
Set the value
using the
>, , ENT key.
Select the flashing digit with the > key.
Increase its value by pressing the
key.
When the correct value is displayed,
press EN
T to enter the change.
>
>
YES
pH
NO
YES
pH
MODE
NO
pH
When the laboratory analysis is completed
the data is entered by first pressing MODE,
then following the sequence belo
w
Note: Display show
s
the value as at the time
of taking the sample
.
ENT
Return to maintenance
menu
NO
NO
pH
NO
YES
YES
pH
NO
YES
pH
NO
YES
pH
NO
YES
YES
NO
NO
pH
NOYES
pH
YES
Note: Display shows
the value as at the time
of taking the sample.
NO
For first calibration
of a new sensor
YES
or
NO
or
To calibrate
ORP or rH
NO
YES
or
Return to maintenance
menu

YOKOGAWA PH202G (S) Specifications

General

Brand	YOKOGAWA
Model	PH202G (S)
Category	Transmitter
Language	English