l
Batteries
• You must use only YOKOGAWA-designated batteries.
•
When mounting or replacing batteries, you must follow the procedure specified in the Us-
er's Manuals of the device.
• When replacing batteries while the power supply is on, do not put your hands inside the
device to prevent electric shock.
SEE
ALSO
For more information about battery, refer to:
• 4.2.1, “Battery” on page 4-5
• 7.7.1, “Replacing Battery” on page 7-34
• ProSafe-RS Installation Guidance (TI 32S01J10-01E)
• User's manual of each device
l
Fuses
• Use only YOKOGAWA-designated fuses for replacement.
•
Turn off the power supply before replacing the fuses.
SEE
ALSO
For more information about replacing fuses, refer to:
• 7.8, “Replacing Parts on Terminal Board” on page 7-40
• 8.5.2, “Parts Replacement” on page 8-23
• ProSafe-RS Installation Guidance (TI 32S01J10-01E)
• User's manual of each device
l
Fan Unit
When replacing the fan unit while the power supply is on, do not put your hands inside the
device to prevent electric shock.
xi
IM 32Q06C10-31E 4th Edition : Jan.30,2015-00