l
Connected Devices
To ensure CSA standard conformity for the entire system of the Product, all the devices con-
nected to the system of the Product should conform to CSA standards.
l
Maintenance
• The Product maintenance should be performed only by personnel who have undergone
specialized training.
•
When a device turns dirty, use a vacuum cleaner or a soft dry cloth to clean it.
• During maintenance, wear a wrist strap and follow Electrostatic Discharge (ESD) precau-
tions.
• If any existing caution label is peeling off, or is dirty and illegible, order a new one with the
part number T9029BX to replace it.
SEE
ALSO
For more information about maintenance, refer to:
• 7., “Maintenance of ProSafe-RS Hardware” on page 7-1
• ProSafe-RS Installation Guidance (TI 32S01J10-01E)
• User's manual of each device
l
Modules, Cards, Cables, and Connectors
When the power is on, only modules, cards, cables, and connectors that are allowed in the
User's Manuals can be replaced, removed, or installed.
SEE
ALSO
For more information about replacing, and removing or installing modules, cards, cables, and connectors, re-
fer to:
• 7., “Maintenance of ProSafe-RS Hardware” on page 7-1
• ProSafe-RS Installation Guidance (TI 32S01J10-01E)
• User's manual of each device
x
IM 32Q06C10-31E 4th Edition : Jan.30,2015-00
To Next Page
Loading...
Need help?
General
