ii
<Toc> <Rev>
IM 05D01D02-41E 1st Edition : May 31,2000-00
■ Safety Precautions
The following symbol is indicated on the controller to ensure safe use.
CAUTION
This symbol on the controller indicates that the operator must refer to an explanation in the
user’s manual in order to avoid the risk of injury or death of personnel or damage to the
instrument. The manual describes how the operator should exercise special care to avoid
electric shock or other dangers that may result in injury or loss of life.
The following symbols are used in the hardcopy user’s manuals and in the user’s manual
supplied on the CD-ROM.
NOTE
Indicates that operating the hardware or software in a particular manner may damage it or
result in a system failure.
IMPORTANT
Draws attention to information that is essential for understanding the operation and/or
features of the controller.
■ Regarding Force Majeure
Yokogawa M&C Corporation assumes no liability for any loss or damage, direct or indirect,
caused by the use of or unpredictable defects of the product.
To Next Page
Loading...
Need help?
General
