YOKOGAWA WT5000 Features Guide

14-4
IM WT5000-01EN
Limitations on Modifying the Settings during Integration
During integration, there are some settings that you cannot change and functions that you cannot execute. For
details, see appendix 9 in the Getting Started Guide, IM WT5000-03EN.
Limitations on Waveform Display during Integration
• During integration, the waveform display trigger does not function. Therefore, the signal level of the waveform
display at the left end of the screen may not be stable.
• During integration, the shortest possible waveform data update interval is 1 s. If you select an update interval
shorter than 1 s, the numeric data and waveform data will contain measured values for different measurement
periods.
14 Integrated Power (Watt Hours/Ampere Hours)

YOKOGAWA WT5000 Specifications

General

Frequency Range	DC, 0.1 Hz to 1 MHz
Number of Channels	Up to 7
Interfaces	USB, Ethernet, GP-IB, RS232
Sampling Rate	10 MS/s
Harmonic Analysis	Up to the 500th order
Weight	Approximately 15 kg
Display	10.1-inch WXGA (1280 x 800) TFT LCD