YOKOGAWA WT5000 - Selecting the Element for Setting the Measurement Range (Element1 to 7, 1 to 7 (ELEMENTS))

3-3
IM WT5000-01EN
Selecting the Element for Setting the Measurement Range
(Element1 to 7, 1 to 7 (ELEMENTS))
The following methods are available for selecting the element for setting the measurement range.
• 1 to 7 (ELEMENTS) keys
• Element 1 to 7 of the S menu
When range Σ link is set to on, the selected elements will switch for each wiring unit according to the wiring
system.
3 Input Settings (Basic Measurement Conditions)